fits year: 2015–2018.

( Brand: Greenfield ), ( Manufacturer Part Number: 915RED ), ( Type: Navy Anchor ), ( Country/region Of Manufacture: United States )
Do I need to use an anchor chain with this anchor it is necessary to use an anchor chain with tenth anchors. Unfortunately, due to the size and weight of some anchors shipping can be expensive.
If the anchor line is too short the anchor may fail to set or break free easily. Excellent for soft to moderate conditions anchor uses a combination of weight and mechanical design to hold pound model weights vary due to metal and coating content. Anchors are tested under average conditions each manufacturer uses different types of coatings so please see each for the type of coating used.
Please see each for specific advantages to each anchor design and recommended anchoring conditions. Each anchor on the market has advantages and disadvantages.
Listed weights are approximate quick penetration high holding power recommended for boats up to 18' in length always use one size larger for storm anchors pvc coated cast iron construction anchor chain is recommended purchased separately recommended 7/1 anchor line scope in average conditions dimensions are as follows length 15 inches, width 8.
The term tenth is property of tie down engineering. Proudly made in the usa. Shipping is actual cost.
It is not necessary to use a chain with Cheney anchors.
If used without a chain, tenth anchors may not set correctly. Therefore, it is not necessary for the anchor to be excessively large or heavy to work. This is a important aspect of anchoring to remember. The length of chain helps the anchor set by holding the anchor stock down.
Greenfield navy anchor. The term ''Richter'' and the Richter design are property of Greenfield products inc.
5 inches, weight 15 pounds. For example to anchor in 30 feet of water, 150 feet of line is required.
Manufactured by Greenfield products inc. Navy style, mushroom, river, and Richter anchors may benefit from the use of anchor chain but will also work without. This anchor is designed for boats up to 18 feet in length .
This means that for every foot of water depth, 5 feet of line is required.
5 inches, length of flukes 6. This anchor looks small for my boat and isn very heavy tenth anchors get their holding power from mechanical design.